Miniplus Door Seals
|Sound Of Silence
|Timber Doors, Security Doors.
TECSOUND® comes in various thicknesses. Each thickness has its own advantages. Client is requested to select the correct thickness which best suits their requirement. The price for each thickness varies and Client should make note and take informed decision.
Other details of TECSOUND® are enlisted under
TECSOUND®’s high visco-elasticity works as an acoustic barrier, thus providing a considerable reduction in sound transmission.High density, asphalt-free, visco-elastic, polymeric membrane, to be applied as a soundproofing / damping element in floors,parquet, metal decks, in combination with absorbent materials.
- Soundproofing against airborne noise in vertical walls with low surface density (lightweight partition walls or boards made of different materials). • Soundproofing against airborne noise in ceilings and lightweight roofs. • Reduction of impact noise level in all types of floors, sandwiched between floor slabs and loose-laid flooring. • Damping of impact noise caused by atmospheric agents on metal decks. • Combined with sound-absorbent materials, it offers products with high acoustic performance. • Its applications in the industrial field cover from the soundproofing of booths to the acoustic insulation of machine-rooms, gutter pipes, sound-damping of metal sheets, etc. • Specially suitable for plasterboard measurements.
For further information see examples in systems sheets.
- High acoustic insulation, combined with soft, flexible elements. • Great elongation capacity • Flexible and adaptable to uneven surfaces and shapes. • Easy handling and cutting. • Cold- and heat-resistance. • Excellent ageing resistance. • Does not absorb water. • Rot-proof.
REGULATIONS • In conformity with EN ISO 140-1, EN ISO 140-3, EN ISO 140-6, EN ISO 140-8, EN 20140-2 y EN ISO 717/1/2. • Quality System ISO:9001
Substrate: TECSOUND lends itself to all types of normal building substrates (renderings, gypsum board, metal,DM, plastic materials). The substrate must be even, smooth, clean and dry. It must also be free from elements that could damage the membrane. If the rendering is old, its condition must be checked to avoid adherence
problems of the TECSOUND sheet to the rendering.
Installation of the membrane: Prior to installing the membrane, an adhesive must be applied to both substrate and membrane, and left to dry for 15 to 20 minutes before bonding the two surfaces. Pressure must be exerted on all the points to ensure correct adherence.
Installation of the membrane on metal decks: Extend the sheet over the substrate progressively. The membrane must be applied in such a way that the length of the roll is perpendicular to the direction of the framework. The membrane must be made to follow the profile of the metal support at all times, ensuring that there is no formation of air pockets. The thermal insulation boards are then installed, mechanically fastened.
Overlaps: Overlap 5 cm both vertically and horizontally. Care must be taken to always seal the laps correctly, as small gaps can reduce the level of acoustic insulation required.
Yield: 1 m2 of membrane covers approximately 0.95 m2 of surface area, including overlaps. On metal decks this will depend on the design of the fretwork.