Call 08048967720 79% Response Rate

Send Email

Door Fitting

Manufacturer of a wide range of products which include fire rated drop down seal, automatic drop drown steel doors seals, acoustic drop down seals, push drop down door seals, automatic drop down seals for glass door and top plus brush door seals.
Fire Rated Drop Down Seal
  • Fire Rated Drop Down Seal
  • Fire Rated Drop Down Seal
  • Fire Rated Drop Down Seal
  • Fire Rated Drop Down Seal
  • Fire Rated Drop Down Seal

Fire Rated Drop Down Seal

Product Price: Rs 1,900 / PieceGet Best Price

Product Details:
BrandSound Of Silence
MaterialAluminium
Trimming Length150 mm
Length3 m
Width21 mm
Country of OriginMade in India

The best seller product for hinged glass doors. Created from the 13×28 CCE model, Glass is installed on the side of the door by a high-sealing double-sided adhesive tape. It is available with many combination of seals and in different profile finishing.

An automatic drop-down seal for doors consists of an internal aluminium profile of variable dimensions depending on the model and on the door system in which it will be installed and of a second inner aluminium profile that is pushed downwards by rigid trust-roads in plastic material. The system is activated by a plunger that pushes against the door frame or on a specific external element when the door closes. Beginning from the plunger side, the internal profile drops downwards to complete its movement on the opposite side for a complete drop. This profile is equipped with a seal the type changes depending on the different models that stick to the floor closing the gap for all the length of the door.

What-is-automatic-drop-down

Automatic drop-down seals for doors are created to close the annoying gap between the door and the floor. Filling the gap when the door is closed, automatic seals keep out dust and insects and protect from air, water, wind and noise to guarantee comfort and safety in living spaces. CCE offers a wide range of products with particular performances to fit any application.

APPLICATION:  Glass doors.
TRIMMING LENGTHS: Up to 150 mm on the opposite side to the plunger. Length 330 can be shortened 50mm.
FIXING TYPE:  With high-strength double-sided adhesive tape.

 

Get Best QuoteRequest A Callback
Automatic Drop Drown Steel Doors Seals
  • Automatic Drop Drown Steel Doors Seals
  • Automatic Drop Drown Steel Doors Seals
  • Automatic Drop Drown Steel Doors Seals
  • Automatic Drop Drown Steel Doors Seals

Automatic Drop Drown Steel Doors Seals

Product Price: Rs 600 / PieceGet Best Price

Product Details:
MaterialAluminum
BrandSound Of Silence
Length3 m
Thickness6 mm
ColorSilver
Width21 mm
ApplicationDoors

TECSOUND® comes in various thicknesses. Each thickness has its own advantages. Client is requested to select the correct thickness which best suits their requirement. The price for each thickness varies and Client should make note and take informed decision. 

Other details of TECSOUND® are enlisted under

TECSOUND®’s high visco-elasticity works as an acoustic barrier, thus providing a considerable reduction in sound transmission.High density, asphalt-free, visco-elastic, polymeric membrane, to be applied as a soundproofing / damping element in floors,parquet, metal decks, in combination with absorbent materials.

APPLICATIONS

  • Soundproofing against airborne noise in vertical walls with low surface density (lightweight partition walls or boards made of different materials). • Soundproofing against airborne noise in ceilings and lightweight roofs. • Reduction of impact noise level in all types of floors, sandwiched between floor slabs and loose-laid flooring. • Damping of impact noise caused by atmospheric agents on metal decks. • Combined with sound-absorbent materials, it offers products with high acoustic performance. • Its applications in the industrial field cover from the soundproofing of booths to the acoustic insulation of machine-rooms, gutter pipes, sound-damping of metal sheets, etc. • Specially suitable for plasterboard measurements.

For further information see examples in systems sheets.

PROPERTIES

  • High acoustic insulation, combined with soft, flexible elements. • Great elongation capacity • Flexible and adaptable to uneven surfaces and shapes. • Easy handling and cutting. • Cold- and heat-resistance. • Excellent ageing resistance. • Does not absorb water. • Rot-proof.

REGULATIONS • In conformity with EN ISO 140-1, EN ISO 140-3, EN ISO 140-6, EN ISO 140-8, EN 20140-2 y EN ISO 717/1/2. • Quality System ISO:9001

INSTALLATION

Substrate: TECSOUND lends itself to all types of normal building substrates (renderings, gypsum board, metal,DM, plastic materials). The substrate must be even, smooth, clean and dry. It must also be free from elements that could damage the membrane. If the rendering is old, its condition must be checked to avoid adherence

problems of the TECSOUND sheet to the rendering.

Installation of the membrane: Prior to installing the membrane, an adhesive must be applied to both substrate and membrane, and left to dry for 15 to 20 minutes before bonding the two surfaces. Pressure must be exerted on all the points to ensure correct adherence.

Installation of the membrane on metal decks: Extend the sheet over the substrate progressively. The  membrane must be applied in such a way that the length of the roll is perpendicular to the direction of the framework. The membrane must be made to follow the profile of the metal support at all times, ensuring that there is no formation of air pockets. The thermal insulation boards are then installed, mechanically fastened.

Overlaps: Overlap 5 cm both vertically and horizontally. Care must be taken to always seal the laps correctly, as small gaps can reduce the level of acoustic insulation required.

Yield: 1 m2 of membrane covers approximately 0.95 m2 of surface area, including overlaps. On metal decks this will depend on the design of the fretwork.

 

Get Best QuoteRequest A Callback
Acoustic Drop Down Seals
  • Acoustic Drop Down Seals
  • Acoustic Drop Down Seals
  • Acoustic Drop Down Seals
  • Acoustic Drop Down Seals

Acoustic Drop Down Seals

Product Price: Rs 2,000 / PieceGet Best Price

Product Details:
MaterialAluminium
BrandSound Of Silence
Min Max Gap15 mm
Sizes Available500 mm
ApplicationTimber Doors, Security Doors
Country of OriginMade in India

Primarily designed for upgrading existing fire resistant doors to provide additional protection against smoke up to 200??C. Can be fitted with minimal disruption to the door assembly. The Batwing® seal is also a highly effective acoustic seal when tested in accordance with BS EN ISO 10140-2: 2010.

Key benefits Curved fin shape minimises open/closing resistance. Flexible elastomeric fins ensure the original shape is maintained, providing ongoing performance and durability in service. Symmetrical design ensures fins are always in contact with two surfaces of door leaf, creating an air chamber to provide excellent acoustic performance. Tested for acoustic performance with BS EN ISO 10140-2: 2010. Meets the smoke leakage performance requirements of BS9999 when tested in accordance with BS 476 Pt 31.1: 1983. Tested for up to 60 minutes under conditions of BS 476: Pt.20/22: 1987 without compromising fire resistance. Variety of standard colours to blend with door designs location. Head and jambs of single and double leaf doors. Use with Practically any drop seal. Min/max gap size 3mm/4mm. Seal material Co-extruded rigid back with flexible fins

 

Get Best QuoteRequest A Callback
Push Drop Down Door Seals
  • Push Drop Down Door Seals
  • Push Drop Down Door Seals
  • Push Drop Down Door Seals

Push Drop Down Door Seals

Product Price: Rs 2,200 / PieceGet Best Price

Product Details:
MaterialStainless Steel
BrandSound Of Silence
Suitable ForInterior Door, Main Door
Finish TypeSatin
Weight21 mm
ColorSilver
Thickness6 mm
Country of OriginMade in India

An automatic drop-down seal for doors consists of an internal aluminium profile of variable dimensions depending on the model and on the door system in which it will be installed and of a second inner aluminium profile that is pushed downwards by rigid trust-roads in plastic material. The system is activated by a plunger that pushes against the door frame or on a specific external element when the door closes. Beginning from the plunger side, the internal profile drops downwards to complete its movement on the opposite side for a complete drop. This profile is equipped with a seal the type changes depending on the different models that stick to the floor closing the gap for all the length of the door.

What is automatic drop down

Automatic drop down seals for doors are created to close the annoying gap between the door and the floor. Filling the gap when the door is closed, automatic seals keep out dust and insects and protect from air, water, wind and noise to guarantee comfort and safety in living spaces. CCE offers a wide range of products with particular performances to fit any application.

APPLICATION:??? Timber doors.

TRIMMING LENGTHS:??? Up to 200 mm on the opposite side to the
plunger. Length 330 can be shortened 50mm, length 430 can be shortened 130mm.

 

Get Best QuoteRequest A Callback
Automatic Drop Down Seals For Glass Door

Automatic Drop Down Seals For Glass Door

Product Price: Rs 2,200 / PieceGet Best Price

Product Details:
MaterialAluminum
BrandSound Of Silence
Weight50 gm
Length2000 mm
Thickness6 mm
ColorSilver
Sealing Gap25mm

An automatic drop-down seal for doors consists of an external aluminium profile of variable dimensions depending on the model and on the door system in which it will be installed and of a second inner aluminium profile that is pushed downwards by rigid trust-roads in plastic material. The system is activated by a plunger that pushes against the door frame or on a specific external element when the door closes. Beginning from the plunger side, the internal profile drops downwards to complete its movement on the opposite side for a complete drop. This profile is equipped with a seal the type changes depending on the different models that stick to the floor closing the gap for all the length of the door.

What-is-automatic-drop-down

Automatic drop-down seals for doors are created to close the annoying gap between the door and the floor. Filling the gap when the door is closed, automatic seals keep out dust and insects and protect from air, water, wind and noise to guarantee comfort and safety in living spaces. CCE offers a wide range of products with particular performances to fit any application.

APPLICATION: All types of swing door.

TRIMMING LENGTHS: 150 mm side opposite plunger.

 

Get Best QuoteRequest A Callback
Top Plus Brush Door Seals
  • Top Plus Brush Door Seals
  • Top Plus Brush Door Seals
  • Top Plus Brush Door Seals
  • Top Plus Brush Door Seals

Top Plus Brush Door Seals

Product Price: Rs 1,500 / PieceGet Best Price

Product Details:
MaterialAluminum
BrandSound Of Silence
Length1130 mm
Trimming Lengths100 mm
ApplicationTimber Doors, Security Doors
Brush MaterialPVC
Brush ColorBlack

TOP Plus brush door seal comes in various thicknesses. Each thickness has its own advantages. Client is requested to select the correct thickness which best suits their requirement. The price for each thickness varies and Client should make note and take informed decision. 

Other details of TECSOUND® are enlisted under

TECSOUND®’s high visco-elasticity works as an acoustic barrier, thus providing a considerable reduction in sound transmission.High density, asphalt-free, visco-elastic, polymeric membrane, to be applied as a soundproofing / damping element in floors,parquet, metal decks, in combination with absorbent materials.

APPLICATIONS

  • Soundproofing against airborne noise in vertical walls with low surface density (lightweight partition walls or boards made of different materials). • Soundproofing against airborne noise in ceilings and lightweight roofs. • Reduction of impact noise level in all types of floors, sandwiched between floor slabs and loose-laid flooring. • Damping of impact noise caused by atmospheric agents on metal decks. • Combined with sound-absorbent materials, it offers products with high acoustic performance. • Its applications in the industrial field cover from the soundproofing of booths to the acoustic insulation of machine-rooms, gutter pipes, sound-damping of metal sheets, etc. • Specially suitable for plasterboard measurements.

For further information see examples in systems sheets.

PROPERTIES

  • High acoustic insulation, combined with soft, flexible elements. • Great elongation capacity • Flexible and adaptable to uneven surfaces and shapes. • Easy handling and cutting. • Cold- and heat-resistance. • Excellent ageing resistance. • Does not absorb water. • Rot-proof.

REGULATIONS • In conformity with EN ISO 140-1, EN ISO 140-3, EN ISO 140-6, EN ISO 140-8, EN 20140-2 y EN ISO 717/1/2. • Quality System ISO:9001

INSTALLATION

Substrate: TECSOUND lends itself to all types of normal building substrates (renderings, gypsum board, metal,DM, plastic materials). The substrate must be even, smooth, clean and dry. It must also be free from elements that could damage the membrane. If the rendering is old, its condition must be checked to avoid adherence

problems of the TECSOUND sheet to the rendering.

Installation of the membrane: Prior to installing the membrane, an adhesive must be applied to both substrate and membrane, and left to dry for 15 to 20 minutes before bonding the two surfaces. Pressure must be exerted on all the points to ensure correct adherence.

Installation of the membrane on metal decks: Extend the sheet over the substrate progressively. The  membrane must be applied in such a way that the length of the roll is perpendicular to the direction of the framework. The membrane must be made to follow the profile of the metal support at all times, ensuring that there is no formation of air pockets. The thermal insulation boards are then installed, mechanically fastened.

Overlaps: Overlap 5 cm both vertically and horizontally. Care must be taken to always seal the laps correctly, as small gaps can reduce the level of acoustic insulation required.

Yield: 1 m2 of membrane covers approximately 0.95 m2 of surface area, including overlaps. On metal decks this will depend on the design of the fretwork.

 

Get Best QuoteRequest A Callback
Minifire Door Seals
  • Minifire Door Seals
  • Minifire Door Seals
  • Minifire Door Seals
  • Minifire Door Seals

Minifire Door Seals

Product Price: Rs 1,600 / PieceGet Best Price

Product Details:
Usage/ApplicationDoor
Size5.5 mm X 14 mm
MaterialAluminum
BrandSound Of Silence
ColorSilver
Length150 mm

With over 6 years of experience of providing acoustic doors. Our doors are known for performance.

Dharma Productions, NCPA, Prithvi Theater, Fountain Head Leadership Centre are few of our esteemed customers for our doors & door enhancement services.
 
Our door frames are made up of old teak wood with Italian seals & gaskets. Semi-finished doors with mdf & ply can be finished by client with laminate, veneer or polish as per client’s choice.

We can treat your existing door (IN MUMBAI JURISDICTION) to increase its acoustic properties by 13db to 25db depending on the quality of your existing door.

 

Get Best QuoteRequest A Callback
Hotel Door Seals
  • Hotel Door Seals
  • Hotel Door Seals
  • Hotel Door Seals
  • Hotel Door Seals

Hotel Door Seals

Product Price: Rs 2,500 / PieceGet Best Price

Product Details:
MaterialAluminum
BrandSound Of Silence
ColorSilver
Length150 mm
Thickness6 mm
ApplicationStiles of Pairs of Doors

TECSOUND® comes in various thicknesses. Each thickness has its own advantages. Client is requested to select the correct thickness which best suits their requirement. The price for each thickness varies and Client should make note and take informed decision. 

Other details of TECSOUND® are enlisted under

TECSOUND®’s high visco-elasticity works as an acoustic barrier, thus providing a considerable reduction in sound transmission.High density, asphalt-free, visco-elastic, polymeric membrane, to be applied as a soundproofing / damping element in floors,parquet, metal decks, in combination with absorbent materials.

APPLICATIONS

  • Soundproofing against airborne noise in vertical walls with low surface density (lightweight partition walls or boards made of different materials). • Soundproofing against airborne noise in ceilings and lightweight roofs. • Reduction of impact noise level in all types of floors, sandwiched between floor slabs and loose-laid flooring. • Damping of impact noise caused by atmospheric agents on metal decks. • Combined with sound-absorbent materials, it offers products with high acoustic performance. • Its applications in the industrial field cover from the soundproofing of booths to the acoustic insulation of machine-rooms, gutter pipes, sound-damping of metal sheets, etc. • Specially suitable for plasterboard measurements.

For further information see examples in systems sheets.

PROPERTIES

  • High acoustic insulation, combined with soft, flexible elements. • Great elongation capacity • Flexible and adaptable to uneven surfaces and shapes. • Easy handling and cutting. • Cold- and heat-resistance. • Excellent ageing resistance. • Does not absorb water. • Rot-proof.

REGULATIONS • In conformity with EN ISO 140-1, EN ISO 140-3, EN ISO 140-6, EN ISO 140-8, EN 20140-2 y EN ISO 717/1/2. • Quality System ISO:9001

INSTALLATION

Substrate: TECSOUND lends itself to all types of normal building substrates (renderings, gypsum board, metal,DM, plastic materials). The substrate must be even, smooth, clean and dry. It must also be free from elements that could damage the membrane. If the rendering is old, its condition must be checked to avoid adherence

problems of the TECSOUND sheet to the rendering.

Installation of the membrane: Prior to installing the membrane, an adhesive must be applied to both substrate and membrane, and left to dry for 15 to 20 minutes before bonding the two surfaces. Pressure must be exerted on all the points to ensure correct adherence.

Installation of the membrane on metal decks: Extend the sheet over the substrate progressively. The  membrane must be applied in such a way that the length of the roll is perpendicular to the direction of the framework. The membrane must be made to follow the profile of the metal support at all times, ensuring that there is no formation of air pockets. The thermal insulation boards are then installed, mechanically fastened.

Overlaps: Overlap 5 cm both vertically and horizontally. Care must be taken to always seal the laps correctly, as small gaps can reduce the level of acoustic insulation required.

Yield: 1 m2 of membrane covers approximately 0.95 m2 of surface area, including overlaps. On metal decks this will depend on the design of the fretwork.

 

Get Best QuoteRequest A Callback
Aluplus Door Seals
  • Aluplus Door Seals
  • Aluplus Door Seals
  • Aluplus Door Seals
  • Aluplus Door Seals

Aluplus Door Seals

Product Price: Rs 2,500 / PieceGet Best Price

Product Details:
MaterialAluminum
BrandSound Of Silence
ColorSilver
Length1230 mm
Trimming Lengths140 mm
ApplicationSecurity and Wood Doors
Thickness6 mm

Aluplus door seals comes in various thicknesses. Each thickness has its own advantages. Client is requested to select the correct thickness which best suits their requirement. The price for each thickness varies and Client should make note and take informed decision. 

Other details of TECSOUND® are enlisted under

TECSOUND®’s high visco-elasticity works as an acoustic barrier, thus providing a considerable reduction in sound transmission.High density, asphalt-free, visco-elastic, polymeric membrane, to be applied as a soundproofing / damping element in floors,parquet, metal decks, in combination with absorbent materials.

APPLICATIONS

  • Soundproofing against airborne noise in vertical walls with low surface density (lightweight partition walls or boards made of different materials). • Soundproofing against airborne noise in ceilings and lightweight roofs. • Reduction of impact noise level in all types of floors, sandwiched between floor slabs and loose-laid flooring. • Damping of impact noise caused by atmospheric agents on metal decks. • Combined with sound-absorbent materials, it offers products with high acoustic performance. • Its applications in the industrial field cover from the soundproofing of booths to the acoustic insulation of machine-rooms, gutter pipes, sound-damping of metal sheets, etc. • Specially suitable for plasterboard measurements.

For further information see examples in systems sheets.

PROPERTIES

  • High acoustic insulation, combined with soft, flexible elements. • Great elongation capacity • Flexible and adaptable to uneven surfaces and shapes. • Easy handling and cutting. • Cold- and heat-resistance. • Excellent ageing resistance. • Does not absorb water. • Rot-proof.

REGULATIONS • In conformity with EN ISO 140-1, EN ISO 140-3, EN ISO 140-6, EN ISO 140-8, EN 20140-2 y EN ISO 717/1/2. • Quality System ISO:9001

INSTALLATION

Substrate: TECSOUND lends itself to all types of normal building substrates (renderings, gypsum board, metal,DM, plastic materials). The substrate must be even, smooth, clean and dry. It must also be free from elements that could damage the membrane. If the rendering is old, its condition must be checked to avoid adherence

problems of the TECSOUND sheet to the rendering.

Installation of the membrane: Prior to installing the membrane, an adhesive must be applied to both substrate and membrane, and left to dry for 15 to 20 minutes before bonding the two surfaces. Pressure must be exerted on all the points to ensure correct adherence.

Installation of the membrane on metal decks: Extend the sheet over the substrate progressively. The  membrane must be applied in such a way that the length of the roll is perpendicular to the direction of the framework. The membrane must be made to follow the profile of the metal support at all times, ensuring that there is no formation of air pockets. The thermal insulation boards are then installed, mechanically fastened.

Overlaps: Overlap 5 cm both vertically and horizontally. Care must be taken to always seal the laps correctly, as small gaps can reduce the level of acoustic insulation required.

Yield: 1 m2 of membrane covers approximately 0.95 m2 of surface area, including overlaps. On metal decks this will depend on the design of the fretwork.

 

Get Best QuoteRequest A Callback
Acoustic Blind Door Seals

Acoustic Blind Door Seals

Product Price: Rs 1,500 / PieceGet Best Price

Product Details:
MaterialAluminum
BrandSound Of Silence
ColorWhite
Length3 m
Thickness6 mm
ApplicationSecurity Doors

TECSOUND® comes in various thicknesses. Each thickness has its own advantages. Client is requested to select the correct thickness which best suits their requirement. The price for each thickness varies and Client should make note and take informed decision. 

Other details of TECSOUND® are enlisted under

TECSOUND®’s high visco-elasticity works as an acoustic barrier, thus providing a considerable reduction in sound transmission.High density, asphalt-free, visco-elastic, polymeric membrane, to be applied as a soundproofing / damping element in floors,parquet, metal decks, in combination with absorbent materials.

APPLICATIONS

  • Soundproofing against airborne noise in vertical walls with low surface density (lightweight partition walls or boards made of different materials). • Soundproofing against airborne noise in ceilings and lightweight roofs. • Reduction of impact noise level in all types of floors, sandwiched between floor slabs and loose-laid flooring. • Damping of impact noise caused by atmospheric agents on metal decks. • Combined with sound-absorbent materials, it offers products with high acoustic performance. • Its applications in the industrial field cover from the soundproofing of booths to the acoustic insulation of machine-rooms, gutter pipes, sound-damping of metal sheets, etc. • Specially suitable for plasterboard measurements.

For further information see examples in systems sheets.

PROPERTIES

  • High acoustic insulation, combined with soft, flexible elements. • Great elongation capacity • Flexible and adaptable to uneven surfaces and shapes. • Easy handling and cutting. • Cold- and heat-resistance. • Excellent ageing resistance. • Does not absorb water. • Rot-proof.

REGULATIONS • In conformity with EN ISO 140-1, EN ISO 140-3, EN ISO 140-6, EN ISO 140-8, EN 20140-2 y EN ISO 717/1/2. • Quality System ISO:9001

INSTALLATION

Substrate: TECSOUND lends itself to all types of normal building substrates (renderings, gypsum board, metal,DM, plastic materials). The substrate must be even, smooth, clean and dry. It must also be free from elements that could damage the membrane. If the rendering is old, its condition must be checked to avoid adherence

problems of the TECSOUND sheet to the rendering.

Installation of the membrane: Prior to installing the membrane, an adhesive must be applied to both substrate and membrane, and left to dry for 15 to 20 minutes before bonding the two surfaces. Pressure must be exerted on all the points to ensure correct adherence.

Installation of the membrane on metal decks: Extend the sheet over the substrate progressively. The  membrane must be applied in such a way that the length of the roll is perpendicular to the direction of the framework. The membrane must be made to follow the profile of the metal support at all times, ensuring that there is no formation of air pockets. The thermal insulation boards are then installed, mechanically fastened.

Overlaps: Overlap 5 cm both vertically and horizontally. Care must be taken to always seal the laps correctly, as small gaps can reduce the level of acoustic insulation required.

Yield: 1 m2 of membrane covers approximately 0.95 m2 of surface area, including overlaps. On metal decks this will depend on the design of the fretwork.

 

Get Best QuoteRequest A Callback
PVC Plus Door Seals

PVC Plus Door Seals

Product Price: Rs 1,800 / PieceGet Best Price

Product Details:
MaterialPVC
BrandSound Of Silence
ColorWhite
Length1830 mm
Brash colorGrey
Trimming Length150 mm

PVC plus Door seal comes in various thicknesses. Each thickness has its own advantages. Client is requested to select the correct thickness which best suits their requirement. The price for each thickness varies and Client should make note and take informed decision. 

Other details of TECSOUND® are enlisted under

TECSOUND®’s high visco-elasticity works as an acoustic barrier, thus providing a considerable reduction in sound transmission.High density, asphalt-free, visco-elastic, polymeric membrane, to be applied as a soundproofing / damping element in floors,parquet, metal decks, in combination with absorbent materials.

APPLICATIONS

  • Soundproofing against airborne noise in vertical walls with low surface density (lightweight partition walls or boards made of different materials). • Soundproofing against airborne noise in ceilings and lightweight roofs. • Reduction of impact noise level in all types of floors, sandwiched between floor slabs and loose-laid flooring. • Damping of impact noise caused by atmospheric agents on metal decks. • Combined with sound-absorbent materials, it offers products with high acoustic performance. • Its applications in the industrial field cover from the soundproofing of booths to the acoustic insulation of machine-rooms, gutter pipes, sound-damping of metal sheets, etc. • Specially suitable for plasterboard measurements.

For further information see examples in systems sheets.

PROPERTIES

  • High acoustic insulation, combined with soft, flexible elements. • Great elongation capacity • Flexible and adaptable to uneven surfaces and shapes. • Easy handling and cutting. • Cold- and heat-resistance. • Excellent ageing resistance. • Does not absorb water. • Rot-proof.

REGULATIONS • In conformity with EN ISO 140-1, EN ISO 140-3, EN ISO 140-6, EN ISO 140-8, EN 20140-2 y EN ISO 717/1/2. • Quality System ISO:9001

INSTALLATION

Substrate: TECSOUND lends itself to all types of normal building substrates (renderings, gypsum board, metal,DM, plastic materials). The substrate must be even, smooth, clean and dry. It must also be free from elements that could damage the membrane. If the rendering is old, its condition must be checked to avoid adherence

problems of the TECSOUND sheet to the rendering.

Installation of the membrane: Prior to installing the membrane, an adhesive must be applied to both substrate and membrane, and left to dry for 15 to 20 minutes before bonding the two surfaces. Pressure must be exerted on all the points to ensure correct adherence.

Installation of the membrane on metal decks: Extend the sheet over the substrate progressively. The  membrane must be applied in such a way that the length of the roll is perpendicular to the direction of the framework. The membrane must be made to follow the profile of the metal support at all times, ensuring that there is no formation of air pockets. The thermal insulation boards are then installed, mechanically fastened.

Overlaps: Overlap 5 cm both vertically and horizontally. Care must be taken to always seal the laps correctly, as small gaps can reduce the level of acoustic insulation required.

Yield: 1 m2 of membrane covers approximately 0.95 m2 of surface area, including overlaps. On metal decks this will depend on the design of the fretwork.

 

Get Best QuoteRequest A Callback
Perimeter Door Seals

Perimeter Door Seals

Product Price: Rs 550 / PieceGet Best Price

Product Details:
Size5.5 mm X 14 mm
Ideal ForDoor
MaterialAluminium
BrandSound Of Silence
ColorSilver
Length2500 mm

Self-adhesive acoustic seal for security doors. Coextruded PVC on self-adhesive base.

 

 ShareShare on Facebook  TweetTweet on Twitter  Pin itPin on Pinterest
Get Best QuoteRequest A Callback
25 mm Door Gasket
  • 25 mm Door Gasket
  • 25 mm Door Gasket
  • 25 mm Door Gasket
  • 25 mm Door Gasket

25 mm Door Gasket

Product Price: Rs 2,000 / PieceGet Best Price

Product Details:
Usage/ApplicationSecurity, Iron & Timber Doors
MaterialRubber
Thickness10 mm
BrandSound Of Silence
ColorBlack
Density13 lbs per square inch

Dispatch Time: - 4 to 5 days from date of receipt of Payment.

Delivery Time: - As per actual.

Transport Cost: - Transport cost on "To Pay Basis" and extra.

Replacement / Refund Policy: - Goods Once sold will not be replaced and/or no refunds shall be made.

Self-adhesive acoustic seal for security doors. Coextruded PVC on self-adhesive base.

 

Get Best QuoteRequest A Callback
Aluminum Door Seals
  • Aluminum Door Seals
  • Aluminum Door Seals
  • Aluminum Door Seals
  • Aluminum Door Seals

Aluminum Door Seals

Product Price: Rs 1,200 / PieceGet Best Price

Product Details:
MaterialAluminum, Rubber
BrandSound Of Silence
Lengthmax 3 m
Trimming Length200 mm
Thickness6 mm
Width21 mm
ApplicationTimber Doors, Security Doors

As submitted by the manufacturing company.

An automatic drop-down seal for doors consists of an internal aluminium profile of variable dimensions depending on the model and on the door system in which it will be installed and of a second inner aluminium profile that is pushed downwards by rigid trust-roads in plastic material. The system is activated by a plunger that pushes against the door frame or on a specific external element when the door closes. Beginning from the plunger side, the internal profile drops downwards to complete its movement on the opposite side for a complete drop. This profile is equipped with a seal the type changes depending on the different models that stick to the floor closing the gap for all the length of the door.

What-is-automatic-drop-down

Automatic drop-down seals for doors are created to close the annoying gap between the door and the floor. Filling the gap when the door is closed, automatic seals keep out dust and insects and protect from air, water, wind and noise to guarantee comfort and safety in living spaces. CCE offers a wide range of products with particular performances to fit any application.

APPLICATION:??? Timber doors, security doors.
TRIMMING LENGTHS:??? Up to 150 mm on the opposite side to the plunger. Length 330 can be shortened50 mm, length 430 can be shortened110 mm.
FIXING TYPE:??? With preassembled woodscrews or selftapping screws.

 

Get Best QuoteRequest A Callback
Rubber Door Gasket

Rubber Door Gasket

Product Price: Rs 1,000 / PieceGet Best Price

Product Details:
Usage/ApplicationDoor Seal
MaterialRubber
Thickness10 mm
BrandSound OF Silence
ColorBlack
Width21 mm
Country of OriginMade in India

Primarily designed for upgrading existing fire resistant doors to provide additional protection against smoke up to 200¿¿C. Can be fitted with minimal disruption to the door assembly. The Batwing® seal is also a highly effective acoustic seal when tested in accordance with BS EN ISO 10140-2: 2010.

Key benefits Curved fin shape minimises open/closing resistance. Flexible elastomeric fins ensure the original shape is maintained, providing ongoing performance and durability in service. Symmetrical design ensures fins are always in contact with two surfaces of door leaf, creating an air chamber to provide excellent acoustic performance. Tested for acoustic performance with BS EN ISO 10140-2: 2010. Meets the smoke leakage performance requirements of BS9999 when tested in accordance with BS 476 Pt 31.1: 1983. Tested for up to 60 minutes under conditions of BS 476: Pt.20/22: 1987 without compromising fire resistance. Variety of standard colours to blend with door designs location. Head and jambs of single and double leaf doors. Use with Practically any drop seal. Min/max gap size 3mm/4mm. Seal material Co-extruded rigid back with flexible fins

 

Get Best QuoteRequest A Callback

EXPLORE MORE CATEGORIES

Contact Us
 
Thank youYour Enquiry has been sent successfully.
© Sound Of Silence. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.